High Efficiency 1A/2A/3A Current-Mode Synchronous Buck DC/DC Converter, 1MHz

Topology: Buck
Input Voltage (min.): 4.50 V
Input Voltage (max.): 24.00 V
Switching Frequency (min.): 900.00 kHz
Switching Frequency (max.): 1100.00 kHz
Output 1: 1.80 V / 2.000 A

Original publication on 2015-08-24, revision 1.7


The TS30011 (1A), TS30012 (2A) and TS30013 (3A) are DC/DCsynchronous switching regulator with fully integrated powerswitches, internal compensation, and full fault protection. Theswitching frequency of 1MHz enables the use of small filtercomponents resulting in minimal board space and reducedBOM costs.The TS30011/12/13 utilizes current mode feedback in normalregulation PWM mode. When the regulator is placed instandby (EN is low), the device draws less than 10uA quiescentcurrent.The TS30011/12/13 integrates a wide range of protectioncircuitry including input supply under-voltage lockout, outputvoltage soft start, current limit, and thermal shutdown.The TS30011/12/13 includes supervisory reporting throughthe PG (Power Good) open drain output to interface othercomponents in the system.


  • Fixed output voltage choices: 1.5V, 1.8V, 2.5V, 3.3V, and 5Vwith +/- 2% output tolerance• Adjustable version output voltage range: 0.9V to (VCC –1V) with +/-1.5% reference.• Wide input voltage rangeŒŒ TS30011/12: 4.5V to 24V (26.4V Abs MaxŒŒ TS30013: 4.5V to 18V (20V Abs Max)• 1MHz +/- 10% fixed switching frequency• Continuous output current: 1A (TS30011), 2A (TS30012)and 3A (TS30013)• High efficiency – up to 95%• Current mode PWM control with PFM mode for improvedlight load efficiency• Voltage supervisor for VOUT reported at the PG pin• Input supply under voltage lockout• Soft start for controlled startup with no overshoot• Full protection for over-current, over-temperature, andVOUT over-voltage• Less than 10uA in standby mode• Low external component count


  Order Code SPEC Product series L
RDC typ.
RDC max.
744774047 PDF WE-PD2 SMT Power Inductor 4.7 3 5.5 0.056 0.071 33