NXP

SSL2102T

Dimmable GreenChip driver for LED lighting

Topology: Flyback
Input Voltage (min.): 0.00 V
Input Voltage (max.): 150.00 V
Switching Frequency (min.): 10.00 kHz
Switching Frequency (max.): 200.00 kHz
Output 1: 33.00 V / 0.600 A

Original publication on 2009-06-29, revision 1.1

Description

The SSL2102 is a Switched Mode Power Supply (SMPS) driver IC that operates in combination with a phase cut dimmer directly from rectified mains. It is designed to drive LED devices. The device includes a high-voltage power switch, a circuit to allow direct start-up from the rectified mains voltage and a high-voltage circuitry to supply the phase cut dimmer.For dimmer applications, an integrated dedicated circuitry optimizes the dimming curve.• SSL2101: fully integrated LED driver for lamps up to 10 W• SSL2102: fully integrated LED driver for lamps up to 25 W• SSL2103: gives the application designer flexibility to:– Use an external power switch to allow the IC to provide any power– Use external bleeder transistors to provide extended dimmer interoperability

Characteristics

  •  Easy migration to existing lighting control infrastructure
  •  Supports most available dimming solutions
  •  Optimized efficiency with valley switching managed by a built-in circuitry
  •  Demagnetization detection
  •  OverTemperature Protection (OTP)
  •  Short-Winding Protection (SWP) and Over Current Protection (OCP)
  •  Internal VCC generation allowing start-up from the rectified mains voltage
  •  Natural dimming curve by logarithmic correction, down to 1 %
  •  Limited external components required because of the high integration level
  •  Thermal enhanced SO20 wide body package
  •  Suitable for flyback and buck applications

Products

  Order Code SPEC Product series L
(µH)
IR
(A)
ISAT
(A)
RDC typ.
(Ω)
RDC max.
(Ω)
fres
(MHz)
Bauform Version Samples
744776268 PDF WE-PD2 SMT Power Inductor 680 0.36 0.43 1.245 2.25 2.7
74477720 PDF WE-PD SMT Power Inductor 100 0.79 0.75 290 610 7.5 7345 Standard
750340772 PDF Power Transformer

Other applications and Würth Elektronik products for this IC

  • SSL2102T
    Topology: Flyback, Input Voltage (min.): 85.00 V, Input Voltage (max.): 276.00 V, Switching Frequency (min.): 10.00 kHz, Switching Frequency (max.): 200.00 kHz, Output 1: 23.00 V / 1.050 A