NXP

PF0100

14 Channel Configurable Power Management Integrated Circuit

Topology: Boost
Input Voltage (min.): 5.00 V
Input Voltage (max.): 5.00 V
Output 1: V / 0.600 A

Original publication on 2010-07-01, revision 12

Description

The PF0100 SMARTMOS Power Management Integrated Circuit (PMIC) provides a highly programmable/ configurable architecture, with fully integrated power devices and minimal external components. With up to six buck converters, six linear regulators, RTC supply, and coin-cell charger, the PF0100 can provide power for a complete system, including applications processors, memory, and system peripherals, in a wide range of applications. With on-chip One Time Programmable (OTP) memory, the PF0100 is available in pre-programmed standard versions, or non-programmed to support custom programming. The PF0100 is defined to power an entire embedded MCU platform solution such as i.MX6 based eReader, IPTV, medical monitoring, and home/factory automation.

Characteristics

  • Four to six buck converters, depending on configuration•Single/Dual phase/ parallel options•DDR termination tracking mode option•Boost regulator to 5.0 V output•Six general purpose linear regulators•Programmable output voltage, sequence, and timing•OTP (One Time Programmable) memory for device configuration•Coin cell charger and RTC supply•DDR termination reference voltage•Power control logic with processor interface and event detection•I2C control•Individually programmable ON, OFF, and Standby modes

Products

  Order Code SPEC Product series L
(µH)
IR
(A)
ISAT
(A)
RDC typ.
(mΩ)
RDC max.
(mΩ)
fres
(MHz)
Montageart Samples
74438335022 PDF WE-MAPI SMT Power Inductor 2.2 1.8 3.5 94 108 45 SMT

Other applications and Würth Elektronik products for this IC

  • PF0100
    Topology: Buck, Input Voltage (min.): 0.40 V, Input Voltage (max.): 3.30 V, Output 1: V / 1.000 A
  • PF0100
    Topology: Buck, Input Voltage (min.): 0.40 V, Input Voltage (max.): 3.30 V, Output 1: V / 2.500 A
  • PF0100
    Topology: Buck, Input Voltage (min.): 0.30 V, Input Voltage (max.): 1.87 V, Output 1: V / 2.500 A
  • PF0100
    Topology: Buck, Input Voltage (min.): 0.30 V, Input Voltage (max.): 1.87 V, Output 1: V / 2.000 A
  • PF0100
    Topology: Buck, Input Voltage (min.): 0.40 V, Input Voltage (max.): 3.30 V, Output 1: V / 2.000 A