STMicroelectronics

STUSB1602
Demoboard P-NUCLEO-USB002

USB Type-C™ controller with TX/RX line driver and BMC

Topologie: Other
Eingangsspannung (min.): 4.10 V
Eingangsspannung (max.): 22.00 V
Ausgang 1: 5.00 V / 0.600 A

Erstveröffentlichung am , Version 04 vom

Beschreibung

The STUSB1602 is a generic IC designed in a 20 V technology. It addresses USB Type-C™ port management both on the host and/or device side, and is suited for a broad range of applications.The STUSB1602 can handle all functions from Type-C attach detection, plug orientation detection, host to device connection, VCONN support, and VBUS configuration. It also provides a USB PD TX/RX line driver and BMC (biphase mark coding) transceiver which allows USB PD negotiation and alternative mode through an external MCU. Additionally, the STUSB1602 provides support for dead battery operation.

Merkmale

  • ◾Type-C™ attach and cable orientation detection◾Power role support: source/sink/DRP◾Configurable start-up profiles◾Integrated power switch for VCONN supply: ◾programmable current limit up to 600 mA◾overcurrent, overvoltage, and thermal protection ◾under-voltage lockout ◾I²C interface and interrupt◾Integrated VBUS voltage monitoring◾Integrated VBUS and VCONN discharge path ◾Integrated BMC transceiver ◾VBUS switch gate driver ◾Low power standby mode ◾Dead battery mode support ◾Short-to-VBUS protection on CC pins (22 V) and VBUS pins (28 V) ◾Accessory mode support ◾Dual power supply (VSYS and/or VDD ): ◾VSYS = V; 5.5 V ◾VDD = V; 22 V ◾Compliant with:◾USB Type-C™ rev 1.2◾USB PD rev 2.0 (Certif. test ID 1010032)◾Compatible with:◾USB PD rev 3.0

Artikel

  Artikel Nr. SPEC Produktserie L
(µH)
L1
(µH)
IR
(A)
IR 1
(A)
ISAT
(A)
ISAT 1
(A)
RDC typ.
(mΩ)
RDC max.
(mΩ)
RDC1 typ
(mΩ)
RDC1 max.
(mΩ)
fres
(MHz)
fres 1
(MHz)
Z @ 100 MHz
(Ω)
Zmax
(Ω)
TC Zmax IR 2
(mA)
Typ Muster
744053680 PDF WE-TPC SMT-Speicherdrossel 68 68 0.75 0.75 0.56 0.56 300 350 300 350 10 10
74279206 PDF WE-CBF SMT-Ferrit 0.025 30 55 1000 MHz 3000 High Current