STMicroelectronics

STNRGPF12
Demoboard STEVAL-IPFC12V1

2-channel interleaved PFC driver with embedded digital inrush current limiter function

Topologie: PFC
Eingangsspannung (min.): 90.00 V
Eingangsspannung (max.): 265.00 V
Ausgang 1: 400.00 V / 8.690 A

Erstveröffentlichung am 01.04.2019, Version Rev 1 vom

Beschreibung

The STNRGPF12 digital controller is designed for interleaved PFC boost topologies and intended for use in high power applications.It features a digital inrush current control implemented with a solid state solution based on a silicon controlled rectifier. The controller can drive up to 2 interleaved channels.The device works in CCM at fixed frequency with average current mode control, in applications based on a mixed signal (analog/digital) architecture.The controller can be configured through a dedicated software tool (eDesignSuite) to match a wide range of specific applications. The tool generates a full schematic including a complete list of material and the final binary object code (FW) to be downloaded to the IC.

Merkmale

  • Digital inrush current limiter function
  • Interleaved PFC digital controller
  • Two interleaved channels PFC
  • Continuous conduction mode
  • Fixed frequency operationAverage current mode controlMixed signal architectureSoft start-up managementBurst mode supportLoad feed forwardInput voltage feed forwardChannel current balance functionProgrammable phase sheddingStatus indicator signaling for cooling system, PFC Fault and PFC OKConfigurable driver by means of dedicated graphic toolProgrammable fast overcurrent and thermal protectionSerial communication port available for: Device programming; Monitoring of the PFC parametersSuitable for >600 W applications: Welding, air conditioner Industrial motors UPS, chargers, high power systemsCustomizable firmwareConfiguration via eDesign suiteEmbedded memoryProgram memory: 32 Kbytes flashData retention 15 years at 85 °C after 10 kcycles at 25 °CData memory: 1 Kbyte true data E2PROM; data retention: 15 years at 85 °C after 100 kcycles at 85 °CFlash and E2PROM with read while write (RWW) and error correction code (ECC) RAM: 6 KbytesCommunication interfaces UART asynchronous protocol for bootloader support and monitoring of the PFC parameters Operating temperature:
  • 40 °C up to 105 °C

Artikel

  Artikel Nr. SPEC Produktserie L
(µH)
IR
(A)
RDC max.
(Ω)
RDC typ.
(Ω)
fres
(MHz)
VR
(V (AC))
VT
(V (AC))
Z @ 100 MHz
(Ω)
Zmax
(Ω)
TC Zmax IR 2
(mA)
Typ Pins Reihen Gender IR 1
(A)
Verpackung Muster
7447480102 PDF WE-TI Tonneninduktivität 1000 0.8 1.15 1 1.1
7448051804 PDF WE-CMBNC Stromkompensierte Netzdrossel Nanokristallin 4.5 18 4.2 250 1500
74279262 PDF WE-CBF SMT-Ferrit 0.3 120 200 510 MHz 1350 Wide Band
61300411121 PDF WR-PHD 2.54 mm THT Pin Header Gerade 4 Single Pin Header 3 Beutel
61304021021 PDF WR-PHD 2.54 mm THT Angled Dual Pin Header Angled 40 Dual Pin Header 3 Beutel