Linear Technology part of Analog Devices


Dual-Channel Low Noise Bias Generators

Topologie: SEPIC
Eingangsspannung (min.): 5.00 V
Eingangsspannung (max.): 20.00 V
Schaltfrequenz (min.): 450.00 kHz
Schaltfrequenz (max.): 2000.00 kHz
Ausgang 1: 12.00 V / 0.050 A
Ausgang 2: 5.00 V / 0.050 A

Erstveröffentlichung am 01.08.2015, Version A


The LT®3095 generates two low-noise bias supplies from a common input voltage ranging from 3V to 20V. Each channel includes a fixed frequency, peak current-mode step-up switching regulator and a low-noise, singleresistor- programmable 50mA linear regulator. The linear regulator’s high power supply ripple rejection (PSRR) combined with its low-noise performance results in less than 100μVP-P output ripple and noise.Each boost regulator adjusts its output voltage to 2V above the corresponding linear regulator’s output voltage, optimizing power dissipation, PSRR and transient response. This tracking scheme, along with internal boost regulator frequency compensation and integrated Schottky diodes, minimizes external component count and simplifies system design. Each linear regulator includes internal current limit and thermal limit protection circuitry.The LT3095 switching frequency is externally programmable with a single resistor from 450kHz to 2MHz. A SYNC pin allows synchronization to an external clock. The LT3095 is available in a thermally enhanced, low profile (0.75mm) 24-lead 3mm × 5mm QFN package.


  • Generates Two Independent Low Noise Bias Supplies
  • Boost Regulator:
  • Wide Input Voltage Range: 3V to 20V
  • Adjustable Switching Frequency: 450kHz to 2MHz
  • Synchronizable to External Clock
  • 950mA Power Switches
  • Integrated Schottky Diodes
  • Internal Frequency Compensation
  • Linear Regulator:
  • Wide Output Voltage Range: 1V to 20V
  • SET Pin Reference Current: 50μA
  • Low Noise: 4μVRMS (10Hz to 100kHz)
  • High Frequency PSRR: 72dB at 1MHz
  • Independent Precision-Threshold Enable Pins
  • Symmetric Pinout Simplifies PCB Layout
  • Thermally Enhanced 3mm × 5mm 24-Lead
  • QFN Package


  Artikel Nr. SPEC Produktserie L1
IR 1
IR 2
RDC1 typ
RDC2 typ
RDC1 max
RDC2 max
fres 1
74489430150 PDF WE-TDC SMT-Doppeldrossel 15 15 0.85 0.85 1.25 0.275 0.275 0.308 0.295 29