Demoboard STEVAL-ILL070V3

Offline controller for LED lighting with constant voltage primary sensing and high power factor

Topologie: Flyback
Eingangsspannung (min.): 90.00 V
Eingangsspannung (max.): 305.00 V
Ausgang 1: 48.00 V / 0.730 A
Ausgang 2: 19.50 V / 0.020 A

Erstveröffentlichung am 07.03.2016, Version 1 vom


The STEVAL-ILL070V3 is designed to drive a single LED string with a maximum output current of 700 mA. The LED current can be finely adjusted using either a 0-10 V interface or a PWM signal (for example provided by a microcontroller) on the SELV portion of the board.The universal input capability makes this board suitable in worldwide designs. An auxiliary 12 V output is also present to supply small circuitries (e.g. a potentiometer to drive the 0-10 V input) providing a maximum current of 10 mA.A very high power factor and high efficiency are obtained even under light loads thanks to the "fixed OFF time" operation of HVLED001. Input voltage variations, excessive input voltage (overvoltage like surges or bursts) or very low input voltages are managed by some of the protections on the HVLED001, improving the reliability of the application. Output open circuit and overload protections trigger auto-restart for safe operation in lighting environments.


  • ◾Input voltage: VIN : 90
  • 305 VRMS , f: 45-66 Hz ◾Output current: 700 mA (VLED = 24 V to 48 V) ◾Dimming: 100% to 10% (any condition) ◾Dimming interfaces: 0-10 V and PWM input ◾High power factor, low THD ◾Efficiency: > 90% @ full load ◾Open load voltage limiting ◾RoHS compliant


  Artikel Nr. SPEC Produktserie L
IR 1
RDC typ.
RDC max.
RDC1 typ
RDC1 max.
fres 1
Montageart Muster
750314819 PDF Offline Transformer
7447471221 PDF WE-TIS Tonneninduktivität 220 220 1.3 1.3 1 1 0.27 0.32 0.27 0.32 2.8 2.8 THT