Demoboard ACT4751EVK1-101

40 V, 4.0 A, USB Fast Charger Power IC for Automotive

Topologie: Buck
Eingangsspannung (min.): 4.00 V
Eingangsspannung (max.): 40.00 V
Ausgang 1: 5.00 V / 0.300 A

Erstveröffentlichung am 24.11.2019, Version 1.1


Qorvo's ACT4751M is an automotive grade, programmable voltage regulator with bias supply rails for microcontrollers or USB PD controllers. It supports a wide input voltage range from 4.5 to 40 V and uses a synchronous step-down (buck) DC-to-DC architecture. It integrates both the high side and low side MOSFETS. These 50 mOhm on-resistance transistors enable high efficiency to reduce power losses.The product's main buck converter can be dynamically programed to an output voltage between 3 and 24 V in 12.5 mV steps via the I2C interface or analog feedback. It also can dynamically program output current between 0 and 4 A in 256 steps via the I2C interface in a constant-current (CC) operation mode. The main buck operates in a proprietary current mode control that supports external clock syncing for switching frequencies between 450 kHz and 2.25 MHz with features of 100% duty, out-of-AM radio frequency and spread-spectrum operation.ACT4751M is a perfect solution for USB Fast Charger applications based on the Power Delivery (PD) 3.0 and Programmable Power Supply (PPS) applications. The product integrates a 5 V / 350 mA mini-buck converter and a 20 mA AUX LDO of 0.9 V to 4.0 V to simplify application system designs. These rails can power up a controller and the 1.5 W VCONN line in active USB-C cables.ACT4751M provides an I2C port supporting fast-mode plus (Fm+, 1 MHz) with configurable address and also provides a full set of protections including UVLO, over-voltage input voltage lockout, OVP, UVP (Hiccup/Latch-off), OCP and TSD.ACT4751M is available in an AEC-Q100 grade, step-cut, side-wall-plating, 32-pin 5mm x 5mm QFN package with a power optimized footprint and exposed pad for improved thermal performance.


  • AEC-Q100 Grade 1:
  • 40 to +125°C•CISPR 25 Class 3: PASS•Certified USB Fast Charger, Reference Designs•Qualcomm Certified, Quick Charger 4+ Designs•4.5 to 40 V operational input voltage•Programmable output voltage by I2C from 3 to 24 V in 12.5 mV steps•Programmable output current limit from 0 to 4 A in 256 step resolution•Automotive, side-wall-plating, 5 mm x 5 mm QFN package


  Artikel Nr. SPEC Produktserie L
74404043470A PDF WE-LQS SMT-Speicherdrossel 47 0.71 0.45 492 15

Weitere Anwendungen und Artikel von Würth Elektronik zu diesem IC

  • ACT4751M
    Topologie: Buck, Eingangsspannung (min.): 4.00 V, Eingangsspannung (max.): 40.00 V, Ausgang 1: 24.00 V / 4.000 A